Saturday, November 30, 2019

Jane DT - 'Winter Flowers' Journal Page

Hello!

Today on the Buzzy Goings on at Bee Crafty blog I am sharing how I developed the layers of an art journal page...


I wanted to create a really layered page but without any extra dimension to make my journal too bulky.  I started by creating the colour using distress oxide ink pads (Picked Raspberry and Peacock Feathers).  For part of this I smooshed the ink directly onto the page and then spritzed with water, to also add a more speckled and splattered effect I put some ink onto acetate, added water and then pressed this more accurately to the page...


Where the colours mixed it also created a lovely purple tone, so pink, blue and purple became the theme of the page. However I was also finding this a bit too bright so used my brayer with white gesso to lighten the page...


At this point I decided that these colours would make a good winter background so decided to go along with the idea.  My next layer was to use some stencils with the same distress oxides - Snowflake 1 Inkable and the Snowflakes D'inkable...


Next I wanted to use some stamps and chose the Yuletide Doodle Art Snowflake set.  To create a crisper image I used archival ink pads that matched the colour scheme.  Once I had stamped I coloured the larger stamps using Pitt Pens...


Again I felt that the page was getting a bit too bright so I used white gesso once more but this time through the Circles D'inkable...


I still hadn't decided what my focal images were going to be, but when I looked at how busy the background had become I felt that silhouette stamps would be good to act as a contrast and stand out well against it.  I used some of the Beautanicals sets with black archival ink then added some glitter glue as frost on the flowers...


Finally I chose a sentiment that I stamped directly onto the page...



Here are the products that I used:

* Beautanicals - Wildflower 2
* Beautanicals - Teasels
* Yuletide Doodle Art - Snowflake
* Wordage - Unloved Flower
* Inkable - Snowflake 1
* D'Inkables - Snowflakes
* D'inkables - Circles
* Distress Oxide Ink Pads

Thank you for looking and happy crafting!

Jane xx

Thursday, November 28, 2019

Karen DT - Live Art

Hello lovely crafters

Been playing around with ATC's for my weekly DT blog for Bee Crafty, using the beautiful
Style Wire Hearts as the focal point. I've not done many ATC's before but thought I'd have a bit of fun xx

Also used:
Distress Oxides 
Ticker Tape 2
Dinkables
Retro Dots and Dash
Black pen


To begin I cut my ATC's from white card, 2.5"x3.5"
I applied some Distress Oxides to my glass mat, spritzed with water, then smooshed my card around. I did this several times, drying in between each layer 


I stamped the hearts and dots and dash stamps randomly on/off the edge of the ATC's. 
Using a fine line pen, I drew some doodles within the heart frames.


Using the same Distress Oxides I blended randomly through the Distressed Harlequin and Brick Wall Dinkables.
I drew a wiggly frame around my ATC'S. 


To complete I stamped, cut out and adhered my Ticker Tape sentiments.

I had a lot of fun making these and I hope to be back with some more.

Crafty hugs xx

Wednesday, November 27, 2019

Caz Harwood - O'Christmas tree card



PRODUCTS USED: 
Bee Crafty Doodle art Yuletide snowflake and bauble stamps 


Pixie powders
Pearlywinks spray
Versafine onyx black ink
Archival watering can ink
Sparkle pen
Angel hair/glitter strands
6x6 card blank

HOW TO MAKE:
Spritz a piece of card with water and then sprinkle on pixie powders and couple of spritzed of pearlywinks - I used blues, yellow and gold.

Next stamp a snowflake background in versafine onyx black ink - stagger them about.

On separate piece of card stamp the tree and sentiment O'Christmas Tree twice.
Die cut the tree into a rectangle, this will be mounted onto the card front.

Stamp some decorative elements using the watering can Archival ink and add sparkle pen details to the tree once you've coloured it. (I used pencils)

Add some angel hair as an additional decorative element. 
Attach the sentiment and stamp a border to finish. 

Hope you like! 
❤️ 
Thanks for looking. 

Saturday, November 23, 2019

Jane DT - HOCHANDA Samples

Hello!

This week on the Buzzy Goings on at Bee Crafty blog I am sharing some of the samples that I made for last weeks HOCHANDA shows that will still be available to watch on Rewind...





Sam and Bev did some great demos so do please check out the programmes if you missed them.

Happy crafting,

Jane xx

Thursday, November 21, 2019

Karen DT - Hochanda Festive Doodle Art samples

Morning xx

I'm up on the Bee Crafty blog today with my Christmas Doodle Art samples for this weeks show. I hope you all got your orders in 😁😁

Products used:
Doodle Art stamps: Snowflakes,  Robin, Baubles, Poinsettia
MDF wreath
MDF Gingerbread
MDF Christmas Embellishments
Dinkables
Dylusions Inks
Distress Oxides
Gilding wax
Sparkle Pens
Inkables: SnowflakesBaubles




MDF wreath, Tree and Bauble embellishments sprayed with Dylysions sprays. Also used Sparkle pens and Gilding Waxes.


I used Dylusions Sprays through the Snowflake Inkable. 
Doodle Art Snowflake and Sentiment stamp 


MDF Gingerbread sprayed with Dylusions Sprays and coloured in with Oil Pencils 
Gilding Wax added to the edges.


Poinsettia Doodle Art stamp.
White Embossing powder.
Snowflake Inkable 
Distress Oxides 


MDF
Dylusions Sprays 
MDF Bauble embellishments 
Doodle Art stamp sets


MDF Gingerbread Man and stars
Bauble Easy Frame
Distress Oxides
Snowflake Dinkables 


Dylusions Sprays through Snowflakes Inkable 
Doodle Art Tree
Gold embossing powder 


Doodle Art snowflakes
Oil pencils 


Inks
Doodle Art Robin and Snowflakes.
Snowflake Inkable 


Doodle Art Tree and Baubles
Gelli Plate 
Distress Oxides 

I hope you enjoyed todays post and got some inspiration from my samples. 

Until next time...
Crafty hugs xxx

Wednesday, November 20, 2019

Caz Harwood - Hochanda Yuletide doodle art show samples

Showcasing all the samples I made for this week's Hochanda shows...hope you enjoyed and are inspired by my makes.
❤️

PRODUCTS USED: 
Doodle art stamps: poinsettia, baubles, robin and snowflakes

MDF bauble wreath

MDF Coin holder bauble

MDF gingerbread people 

Ink'able Snowflake template

Bauble template/frame

Distress oxides


Bauble coin holder - painted, holes filled with resin and glitter, ribbon to hang.

Bauble wreath - sprayed with distress oxide sprays, gilding wax added, additional elements glued on, lava paste for snow effect, sentiment stamped and glued on, ribbon to hang.

Snowflake Ink'able card - template placed on card and ink sprayed over top, stamped sentiment and mounted.

Robin card - teal ink spritz, stamped text from snowflake set, snowflakes stamped in grey archival, robin and sentiment fussy cut and stuck on with foam tape.

Snowflake card on Kraft - snowflakes stamped in gesso, snowflake Ink'able sponged gesso through, ink spatters, sentiments added and stickles added for sparkle.

Mixed media poinsettia card - distress ink brayered background, inked baubles, poinsettias fussy cut and coloured with inktense pencils, decorative elements and sentiment added.

Tree card - blended ink background using distress/oxides, stamped tree and decorative elements plus sentiment, mounted. 

MDF robin tag - snowflakes MDF glued on and gilded, nuvo spray to coat, spatters of white gesso for snowy background, lava paste for snow floor, robin fussy cut and coloured.

Gingerbread people garland - decorated MDF with metallic bronze paint, details added with posca pens and 3D Enamels by Dovecraft. 

Bauble card - Ink'able frames used, layered to get this look, then I drew around one and cut it out, heat embossed a design on it and added foam tape to mount, tag from robin stamp set.

Hope you like! 
❤️ 
Thanks for looking. 

Saturday, November 16, 2019

Jane DT - Layered Sunflower Tag

Hello!

This week on the Buzzy Goings on at Bee Crafty blog I am sharing a tag that I have made.  At the moment I am really loving creating lots of layers, often with different materials and textures, but for this project I thought I would create those layers using lots of stamping...


I started by using one of the Dylusions mixed media tags (number 10) and with my brayer added layers of distress inks (Crushed Olive, Wild Honey and Vintage Photo)...


Next I used the same 3 colours of distress ink to add random background stamping - Multi Mini Distressed Diamonds, Texture Circles and Texture Borders...


Using the Ledger Measure stamps, I added some Versamark and then gold embossing powder.  When I first stamped the larger of the stamps along the right hand side it felt a bit too overpowering so I brushed away some of the powder to create a more faded and distressed look, then stamped the other parts more fully...


I am so used to adding stenciling to my projects that I really felt I wanted to use some,  I chose the Circle Lattice d'inkable and applied Vintage Photo distress ink through it with a stencil brush...


At this point I was starting to think about my focal points and after deciding where they would be used a few of the Stitch Borders with sepia Versafine to create a more defined area...


To create more dimension but also echo the linear look, I stamped out the tape measure from the Stitch Border set and coloured them with some distress ink before adhering to the tag...


I wanted one more focal image to contrast with the background and create even more dimension so I chose the Beautanicals Large Sunflower, which I cut out and coloured with the same colour distress inks...


The final touch was one of the Small Words stamps which I stamped onto brown card and embossed with gold powder...



Here are the products used:


I am really loving mixing up my stamp sets to create layers!  If you have made any projects using Bee Crafty products we would love to see them in the Bee Crafty group on Face Book, so please do pop over for a look.

Thank you for looking and happy crafting!

Jane xx

Related Posts Plugin for WordPress, Blogger...